Edimax-technology PS-1206MFG Instrukcja Użytkownika

Wireless LAN MFP Server User’s Manual Version: 2.0 (August, 2006)

2 2. Product Package This package contains the following components:  One MFP Server  One Antenna  One Power Adapter  One Quick Installation Guide

92 12. Choose to set the print whether as a default printer or not. Click “Next”. 13. You have added the network printer to the PC successfully. The

93 11. IPP Printing 11.1 Introduction IPP (Internet Printing Protocol) Printing provides a convenient way of remote printing service by TCP/IP. The MF

94 3. The “Add Printer Wizard” is displayed. Click “Next”. 4. Select “A network printer, or a printer attached to another computer”. Click “Next”.

95 5. Select “Connect to a printer on the Internet or on a home or office network” and enter the URL of MFP Server. The URL format is “http://IP:631/

96 6. Select a suitable printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to instal

97 8. You have added the network printer to the PC successfully. The information of the printer is displayed in the windows. Click “Finish”.

98 12. MFP Server Installation in Windows 98SE/Me/NT This MFP Server supports TCP/IP network protocol and IPP, RAW and LPR printing protocols, it can

99 12.1 Software Installation Procedure The following are the installation steps in Windows 98SE. To install MFP Server in Windows Me/NT, the procedu

100 3. The message is prompted to remind you that the MFP Server will only support print sharing function since the operation system of your computer

101 5. Click “Next” to install the MFP Server utilities in the default folder or click “Change” to specify the destination folder where you would lik

3 3. MFP Server with Print Server This MFP Server supports dual functionalities: MFP Server Mode and Print Server Mode at the same time. Users can ch

102 6. The MFP Server Utilities are being installed. 7. The “Configuration” screen is displayed. If you want to configure the MFP Server, please cl

103 8. The MFP Server List will auto search the MFP Servers in the network. Select the MFP Server you want to setup and click “Next” to continue. 9.

104 10. Set the “Alias Name” and the “Server Description” here. Click on “Next”. Note: You can define the location or other information of the MFP Ser

105 12. The “Wireless Network Settings” screen will allow you to connect your wireless MFP Server to your wireless router, access point, or point-to

106 13. If you chose to connect to an encrypted network, the “Wireless Security Settings” screen will be appeared. You have to select the “Security

107 14. The settings are finished click “Finish” to apply new settings. 15. Click “Finish” to complete the installation.

108 16. The default wireless setting is “Auto” mode. The MFP Server will detect if the MFP Server is connected to a wired LAN network through the atta

109 12.2 Server Utilities After the installation is completed, there will be three utilities and a text file in the MFP Server’s Program folder. Netw

110 12.3 Network Port Setup “Network Port Setup” Utility offers a very simple method to add or remove MFP Server’s printer port from the client’s comp

111 12.4 Add Printer After adding a “Network Port” of the MFP Server to your computer, you can follow the procedure described below to add printer to

4 enable users to share print function from MFP or Printer. The supported OS is Windows 98SE/Me/NT/2000/XP/2003, Unix, Linux and MAC OS 9.x above. For

112 5. Select a suitable printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to insta

113 7. Please enter the new name for the printer or click “Next” to keep the default printer name. 8. Choose to print the test page or not. It is

114 9. The drivers of the printer will be installed. After complete the installation, the printer has been added to your computer.

115 13. UNIX/Linux System Network The MFP Server is available for TCP/IP printing by Unix/Linux LPD (Line Printer Daemon) protocol. This chapter expla

116 2. Click “New” to add the MFP or printer with the MFP Server. 3. Click “Forward”.

117 4. Set the printer queue name and the short description of the MFP or printer and click “Forward”. 5. In the following screen, please configu

118 6. Select the MFP or printer manufacturer and model and click “Forward”. 7. Please review the settings. If the settings are no problem, click

119 8. To print a test page and apply all the settings, please click “Yes”. 9. If the test page is printed without problem, please click “Yes”. I

120 13.2.1 Enable MFP Server’s TCP/IP Support The default configuration of the MFP Server is with TCP/IP support enabled. Anyway, you can configure t

121 To configure the IP address data for the BOOTP server, you will need to log in the host of BOOTP server as the superuser (root). Perform the follo

5 4. MFP Server Installation in Windows 2000/XP Before you start, you should have:  One computer with Windows 2000 SP4 above and Windows XP SP1 ab

122 13.2.3 Verify MFP Server’s IP Address To verify your MFP Server is responding to the newly assigned IP address using a PING command: ping ip-add

123 3. Add an entry to the host’s /etc/printcap file, similar to the following: printer-name:\ :lp=:\ :rm=203.66.191.186:\ :rp=lpt1:\ :lf=/va

124 14. MFP Server Installation in MAC OS LPR Printing (Line Printer Remote technology) allows Macintosh computers to connect to MFPs or printers via

125 14.2 MAC 10.3.x To enable LPR Printing in Macintosh 10.3.x, please follow the procedures below. 1. In the Desktop, click “System Preferences”. 2

126 3. From the “Print & Fax” screen, click “Set Up Printers…”. 4. Click “Add” to add the new MFP Server through TCP/IP.

127 5. Enter the “Printer Type”, “Printer Address” and “Queue Name” and select the “Printer Model” to setup the MFP Server. Click “Add” to continue.

128 6. The MFP Server is installed completely. You can see it in the “Printer List”. 7. You can print a file to check whether the MFP Server is ins

129 15. Troubleshooting 1. This product is not found even after searching by the “MFP Manager”.  Check if the power adapter and the network cable ar

130 3. A user always connects the MFP Server.  Contact with the current user and ask the user to disconnect the device.  If the user forgets to d

131 6. When I use LPR, IPP or RAW printing, the printing jobs are not able to print to the MFP or printer.  Check if the MFP is “Idle” but not being

6 program can be run in Windows 2000 SP4 above and Windows XP SP1 above. Please follow the steps below to start installation. Tip: You have to unins

132 Appendix: MFP Server Compatibility List The compatibility information is the first released in August 2006. For the latest information, please con

133 Windows 2000 & XP No. Brand Name MFP Model Print Scan Fax Card Reader26. HP PhotoSmart 8230 3 N/A N/A 3 27. HP PhotoSmart 8250 3 N/A

134 Windows 2000 & XP No. Brand Name MFP Model Print Scan Fax Card Reader61. LEXMARK P6210 3 3 N/A 3 62. LEXMARK X3330 3 3 N/A N/A 63

7 3. The “MFP Server Utilities - InstallShield Wizard” is displayed, click "Next". 4. Click “Next” to install the MFP S

8 “Change” to specify the destination folder where you would like to install the MFP Server utilities. 5. The system starts installing

9 6. The MFP Server is installing the MFP Server utilities. When you find the following screen, please click “Continue Anyway”. 7. The MFP Serv

10 8. The “MFP Server Configuration” screen is displayed. If you want to configure the MFP Server, please click “”Next” directly. Or you can select

11 10. Enter the “User Name” and “Password” of the MFP Server you have selected to login the MFP Server. The default “User Name” is “admin”; default

COPYRIGHT Copyright ©2006/2007 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored

12 12. Please set the network settings for the MFP Server manually. By default, the network settings are as follows. IP Address: 19

13 network, the MFP Server will automatically obtain and configure the network settings assigned by the DHCP Server. The assigned IP Address will be s

14 manually enter the wireless network information (Manual mode). By default, the wireless settings are as below. Mode: Ad Hoc SSID: Default Channel

15 15. The configurations are finished. Please click “Finish” to apply new settings. 16. Click “Finish” to complete the installation. Note: If t

16 17. Choose if you want to run the “MFP Manager” utility automatically when Windows starts. It is recommended to enable the setting. 18. The defa

17 Server Configuration – Allows you to configure the MFP Server’s IP Address, network protocols and other advanced features. It also allows you to m

18 Before you start to install the MFP selected from the “MFP Server List”, please check your computer’s MFP installation status.  You never instal

19 To connect the MFP to your computer through the MFP Server just like you have directly connected the MFP to your computer through the USB cable, y

20 2. The Windows will detect the new hardware and prompt to install the MFP drivers. When the system stops prompting, the drivers are all installed

21 4.4.2 MFP Drivers/Utilities has been installed 1. To bundle the MFP drivers/utilities that you have installed to the MFP Server, please follo

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital devi

22 2. The Windows will detect the new hardware and prompt to install the MFP drivers. When the system stops prompting, the drivers are all installed

23 Tip : The new copy of the MFP is bundled to the MFP Server. Please use the MFP to share print, scan, card reader or fax functions through the netwo

24 5. Using the MFP After you have followed the install wizard to finish the MFP installation, the MFP is now connected to your computer. You can sta

25 5.1 Share Print The MFP will be added to “Printers and Faxes” in the Windows after the MFP is installed. When you have connected to the MFP by clic

26 5.2 Share Scan Most of the MFP provides scan utility for users. You can scan pictures or documents through the utility. In Windows XP, user can als

27 plugged card reader through the MFP Server. 5.4 Fax a File If the MFP supports fax function, you can fax files from your computer

28 An example: Fax through HP Officejet 5600 Series After the MFP is installed, there is a fax device will be added to “Printers and Faxes” in the Win

29 3. The “Send Fax” screen is popped up, please configure the file and enter the fax number. Click “Send Fax” to fax the file.

30 6. MFP Manager 6.1 MFP Server List The “MFP Manager” can automatically find the MFP server in the network and show it in the MFP Server List. User

31 the network. You can find the information of the MFP Servers including “MFP Server Name”, “MAC ID”, “IP Address” and the device that is connected t

Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled

32 Refresh Refresh the “MFP Server List” immediately. Connect Let the MFP be connected to your computer. Disconnect Disconnect the selected M

33 My Favorite List My Favorite List The “My Favorite List” will list your favorite MFP Servers. You can find the information of the MFP Servers

34 minutes (5-255) disconnect the current connection after the MFP is idle for a specified period of time. By default, it is never released. It is re

35 MFP is not connecting by a user. Please follow the message to retry and the MFP will queue your printing job in your computer spooler. The MFP Serv

36 3. Select the MFP that is connected to the selected MFP Server. Click “Ok”. Note that in some cases, new coming printing jobs cannot be printed b

37 6.4 Quick Setup Right click on the MFP Server icon in the system tray you can see the MFP servers you have designated to “My Favorite Li

38 disconnect the MFP and check the MFP information from the here easily. Quick Setup Status The current status of the MFP will be displayed he

39 listed as the illustration above. 6.5 Option Settings 6.5.1 General Setting

40 General Setting Run MFP Manager when Windows starts Execute the “MFP Manager” when Windows starts every time. By default, it is enabled. Minim

41 Note: If the remote MFP Server you have searched is behind NAT Router, the MFP Server may not operate normally.

EU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland, France, Ge

42 7. Server Configuration 7.1 Introduction This chapter introduces MFP Server’s system configuration utility in Windows environment. This utility pro

43 7.2 Search for All Available MFP Server Every time when you run the “Server Manager” configuration utility, click the “Search” icon on the to

44 7.3 Status of MFP Server Click “Status” icon on the tool bar, the status of the currently selected MFP Server will be showed on the right sid

45 7.4 Setup the MFP Server Click “Setup” icon on the tool bar, the setup items of the current selected MFP Server will be showed on the right s

46 7.5 General Configuration Double Click “General” icon and the General configuration window will pop-up. You can see basic MFP Server information

47 7.6 TCP/IP Configuration Double Click “TCP/IP” icon and the TCP/IP configuration window will pop-up. You can configure the MFP Server to automa

48 to automatically get an IP from DHCP server, select “Auto IP”. You also can select “Static IP” to manually assign “IP Address”, “Subnet Mask” and “

49 7.7 System Configuration Double Click “System” icon and the System configuration window will pop-up. In the System configuration page, you can

50 configure the wireless function. Auto – “Auto” is the default setting of the MFP Server. At this mode, the MFP Server will automatically decide t

51 MFP Server through Ethernet first and make sure your wireless LAN setting is correct. After setting the wireless LAN, unplug the Ethernet cable and

Contents 1. Introduction ... 1 2. Product Package ...

52 When the MFP Server starts up, it will auto-detect if the LAN port is connected to an active network by an Ethernet cable. If this is the case, the

53 In the Infrastructure mode, you have to let the MFP Server associate with an access point. You let the MFP Server scan for an available access po

54 access point in the list and click “Next”. If you cannot find the access point that you want to use, click “Scan” to let the MFP Server scan again.

55 The list is the scanned active wireless stations. Select a wireless station in the list and click “Next”. If you cannot find the wireless station

56 This MFP Server supports WEP and WPA-PSK security mode. If you want to use WEP encryption to protect your wireless network, you have to select

57 You can select “64 bit” or “128 bit” length and “Hexadecimal” or “ASCII” format for the encryption key. Longer key length can provide stronge

58 Key 1 to Key 4 – Enter four key values by following the rules below and select one key as the default key. If the key length is 64-bit, enter 10-

59 “WPA-shared key” (for an infrastructure network) or “WPA-None” (enables WPA security for your ad hoc network) requires users to select the advanc

60 You can select to let the MFP Server automatically obtain IP settings with DHCP client or manually assign the IP settings. If you manually assig

61 Click “Save” to save the wireless configuration. 7.9 MFP Server Management Double Click “MFP Server Management” icon and the M

7.9 MFP Server Management ... 61 7.10 Report ...

62 Force Release: Select the port number and then click “Force Release” will help to you disconnect the current connection between the user and the co

63 8. Web Management 8.1 Introduction MFP Server can be configured and managed on the Web. Through Local Area Network, or even Internet, administrator

64 8.2 Login You may use any Web Browser to review the status or configure the settings of the MFP Server. After entering the IP address of the MFP Se

65 8.3 Device Status 8.3.1 System Status System Information includes “Device Name”, “MFP Server Name”, “Model Type”, “Firmware Version”, “MAC Addre

66 8.3.2 Printer Status This page lists information and the status of MFP or printer connected to the MFP Server port. The status of the MFP or pri

67 8.3.3 TCP/IP Status This page lists all TCP/IP settings of the MFP Server including “IP Address”, “Subnet Mask” and “Gateway”. It also can tell

68 8.4 Setup Wizard Note: You can configure the MFP Server from the Setup Wizard. To let the changes take effect, you have to click “Save Settings” in

69 8.4.1.1 Advanced Settings Some advanced feature of the MFP Server can be set here. TCP/IP Printing (LPR/IPP/RAW): This MFP Server supports TCP/

70 8.4.2 Wireless If you want to use the MFP Server through wireless LAN, please set up the MFP Server through Ethernet first and make sure your wirel

71 Ethernet or wireless LAN mode. It cannot work in both Ethernet and wireless LAN mode at the same time. When the MFP Server starts up, it will auto-

13.2.3 Verify MFP Server’s IP Address ...122 13.2.4 Configure Remote LPD Printing on the Host...

72 8.4.2.1 Site Survey You can use this “Site Survey” function to search for available access points in you location. In the list is the informatio

73 8.4.2.2 Encryption This MFP Server supports WEP and WPA-PSK security mode. If you want to use WEP encryption to protect your wireless network, you

74 Default Key – Select one of the four keys to encrypt your data. Only the key you select it in the “Default key” will take effect. Key 1 – Key 4 –

75 WPA-PSK Mode or WPA-None Security Mode:

76 “WPA-shared key” (for an infrastructure network) or “WPA-None” (enables WPA security for your ad hoc network) requires users to select the advance

77 8.4.3 TCP/IP You can configure the MFP Server to automatically get IP from DHCP server or manually specify static IP. If you need the MFP Serv

78 8.4.4 Save Settings After configuring the MFP Server, you have to click the “Save Settings” to save the settings and restart the system.

79 8.5 System Tools 8.5.1 Load Default You can use this page to restore the factory default settings. All of your previous setup will be cleared.

80 8.5.2 Upgrade Firmware You can upgrade new firmware for this MFP Server in this page. Click “Browse” to select the new firmware in your storage

81 9. LPR Printing LPR Printing (Line Printer Remote technology) allows users to connect to MFPs or printers via TCP/IP for printing sharing. The comp

1 1. Introduction Thank you for purchasing and using our 802.11g Wireless LAN MFP server. This MFP server allows your Multi-function, all-in-one print

82 4. Select “Local Printer attached to this computer” and click “Next”. 5. Choose “Create a new port” and “Standard TCP/IP Port”. Click “Next”.

83 6. Please make sure that the MFP Server and the MFP or Printer have turned on and connected to the network correctly before you continue. Click “N

84 8. Select “Custom” and click “Settings”. When you have finished the settings at step 9, click “Next” to continue. 9. Select “LPR” and enter “lpt

85 10. Click “Finish”. 11. Select a suitable printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click

86 12. Choose to set the print whether as a default printer or not. Click “Next”. 13. You have added the network printer to the PC successfully. The

87 10. RAW Printing RAW Printing allows users to connect to MFPs or printers via TCP/IP for printing sharing. The computer with Windows 2000/XP/2003 o

88 4. Select “Local Printer attached to this computer” and click “Next”. 5. Choose “Create a new port” and “Standard TCP/IP Port”. Click “Next”.

89 6. Please make sure that the MFP Server and the MFP or Printer have turned on and connected to the network correctly before you continue. Click “N

90 8. Select “Custom” and click “Settings”. When you have finished the settings at step 9, click “Next” to continue. 9. Select “RAW” and enter “lpt

91 10. Click “Finish”. 11. Select a suitable printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click